What tools are needed for metal assembling models ktclubs.com

What tools are needed for metal assembling models

The assembly of metal puzzles is difficult to complete with bare hands alone, and requires the use of some tools to complete.

Tools include tweezers, pliers, cutters, glue, etc., mainly for clamping, bending, cutting, repair, etc.

The choice of tools, depending on the specific circumstances of the assembler.

For example, if you only want to try to play a simple puzzle shape, the experience is not too high requirements for the appearance of the finished product, then a tweezers will be enough in most cases.

If the assembler has a great interest in this kind of puzzle, plan to put together 5, 6, or even more, hope that the process of assembling more smoothly, the finished model finished with a higher degree of regularity, then we need to use a more complete set of tools to help complete the assembly.

The following is a brief introduction of the four tools used in the assembly. It should be noted that, in general, the tools referred to here, and many household tools may be different, although the name sounds the same in general.

[1] Tweezers Used to hold parts, bending parts.

【2】 Needle-nose pliers Used to hold parts, bending parts, the frequency of use is lower than tweezers, but in some cases, you can do things that are difficult to do with tweezers, sometimes it may be necessary to use tweezers and needle-nose pliers with the two.

[3] Oblique nail clippers Used to cut the parts and metal plate connection point to remove the parts. Special tips, we recommend not to use or use this tool as little as possible, because cutting will produce sharp metal stubble.

【4】 502 glue belongs to the spare parts. Metal puzzle is a snap connection, normal assembly is not used. If in the process of assembling once the parts break, or after the installation of the parts feel loose connection, then you can use glue for gluing.
Regresar al blog

Deja un comentario

Ten en cuenta que los comentarios deben aprobarse antes de que se publiquen.